Skip to content
BuildMath

Rafter Length Calculator · Free calculator

24 ft Span, 6/12 Pitch Rafter Length

On a 24-foot-wide building with a 6/12 roof, each common rafter is 13' 4-3/16" from ridge to wall, or 14' 5-9/16" with a 12" overhang — cut from a 16' board. The ridge sits 5' 11-5/8" above the top plate.

Quick answer

Rafter w/ 12" overhang
14' 5-9/16"
Line length
13' 4-3/16"
Buy
16' board
Ridge rise
5' 11-5/8"
Plumb cut
26.6°
Seat cut
63.4°

▍Rafter Length Calculator

ft
/12
in
Rafter length (incl. overhang)
14' 5-9/16"
Buy: 16' board
SPAN 24'RISE 5' 11-5/8"14' 5-9/16"
Line length
13' 4-3/16"
Overhang length
1' 1-7/16"
Run (− ½ ridge)
11' 11-1/4"
Total rise
5' 11-5/8"
Plumb cut
26.6°
Seat cut
63.4°

24' span @ 6/12 — overhang options

OverhangOverhang lengthTotal rafterStock length
0"0"13' 4-3/16"14'
12"1' 1-7/16"14' 5-9/16"16'
16"1' 5-7/8"14' 10-1/16"16'
24"2' 2-13/16"15' 7"16'

24' span at other pitches (12" overhang)

PitchRidge riseRafter lengthStock length
3/122' 11-13/16"13' 4"14'
4/123' 11-3/4"13' 7-5/8"14'
5/124' 11-11/16"14' 0-3/16"16'
6/125' 11-5/8"14' 5-9/16"16'
7/126' 11-9/16"14' 11-3/4"16'
8/127' 11-1/2"15' 6-9/16"16'
9/128' 11-7/16"16' 2-1/16"18'
10/129' 11-3/8"16' 10-1/16"18'
12/1211' 11-1/4"18' 3-9/16"20'

How the math works

  1. Run = span ÷ 2 − ½ ridge (1-1/2"): 144" − 3/4" = 11' 11-1/4"
  2. Slope factor for 6/12 = √(144 + 36) ÷ 12 = 1.1180
  3. Line length = 143.250" × 1.1180 = 13' 4-3/16"
  4. Overhang = 12" × 1.1180 = 1' 1-7/16"
  5. Total = 14' 5-9/16" → next stock length 16'

Rafter size (2x6 / 2x8 / 2x10 / 2x12) depends on spacing, species and snow load — check the IRC rafter span tables (Section R802) for your run.

Trade pro tips

  • The horizontal run for this roof is 11' 11-1/4" — that is the number to look up in the IRC rafter span tables.
  • Cut one pattern rafter, test it at both ends of the building, then use it to mark the rest.
  • Measure line length along the top edge from the ridge plumb cut to the birdsmouth heel.

Frequently asked questions

How long are the rafters for a 24 ft span with a 6/12 pitch?

13' 4-3/16" from ridge to wall line, 14' 5-9/16" including a 12" overhang (1-1/2" ridge board deducted). Buy 16' boards.

How tall is a 6/12 roof on a 24 ft wide building?

The ridge rises 5' 11-5/8" above the top of the wall plate (run 11' 11-1/4" × 6/12), not counting rafter depth.

What are the rafter cut angles for 6/12?

Plumb cut (ridge and tail) 26.6°, seat cut of the birdsmouth 63.4°. On a speed square, pivot to "6" on the common scale.

How many rafters for a 24 ft wide roof?

Two per rafter pair (one each side). Pairs = building length × 12 ÷ spacing + 1 — a 20 ft long 24' wide building at 16" OC takes 16 pairs (32 rafters) of 16' stock.